Looking for an effects processor that has the ability to be programmed to run any overdrive/Distortion pedal sounds into the front of the amp and any time based effects in the same patch sent to a secondary output that can run into the amps effects loop.
I know that there are some out there but am not seeing this mentioned amongst most of the top processors descriptions.
Is this Dual output ability called something?
Effect processor's with Dual outputs
Moderators: greatmutah, GuitarBilly
-
Mesa/Kramer
- Hall of Fame Member
- Posts: 2868
- Joined: Sat Jan 19, 2013 4:10 pm
- Location: Seattle
Effect processor's with Dual outputs
Soldano SLO 100
Marshall DSL 50
Mesa Boogie MK III
Peavey 5150 II
Bugera 1960
Jet City JCA 50
Jet City JCA 20
ADA MP-1
Marshall DSL 50
Mesa Boogie MK III
Peavey 5150 II
Bugera 1960
Jet City JCA 50
Jet City JCA 20
ADA MP-1
-
gb74
- Hall of Fame Member
- Posts: 538
- Joined: Mon Jan 21, 2013 12:51 pm
- Location: Tarzana, CA
- Contact:
Re: Effect processor's with Dual outputs
It's called the 4 cable method.
There are ton of units that offer it. TC G-System, Boss GT8/10/100, Digitech RP1000, Line 6 M13/HD500 etc etc
If I understood the question correctly.
There are ton of units that offer it. TC G-System, Boss GT8/10/100, Digitech RP1000, Line 6 M13/HD500 etc etc
If I understood the question correctly.
-
Mesa/Kramer
- Hall of Fame Member
- Posts: 2868
- Joined: Sat Jan 19, 2013 4:10 pm
- Location: Seattle
Re: Effect processor's with Dual outputs
guitarbilly wrote:It's called the 4 cable method.
There are ton of units that offer it. TC G-System, Boss GT8/10/100, Digitech RP1000, Line 6 M13/HD500 etc etc
If I understood the question correctly.
Ahh..... 4-cable method.
I will search for that thanks.
And if anyone has any reccomendations on any 4-cable units feel free to post what you have liked.
Soldano SLO 100
Marshall DSL 50
Mesa Boogie MK III
Peavey 5150 II
Bugera 1960
Jet City JCA 50
Jet City JCA 20
ADA MP-1
Marshall DSL 50
Mesa Boogie MK III
Peavey 5150 II
Bugera 1960
Jet City JCA 50
Jet City JCA 20
ADA MP-1
-
~Abstract~
- Hall of Fame Member
- Posts: 4304
- Joined: Sun Jan 20, 2013 2:13 pm
- Location: Dumdum's foe list
Re: Effect processor's with Dual outputs
After that...go look up w/d/w (wet / dry / wet)...it's the logical conclusion of that whole train of thought. :thu:
My trash is whitest.
Good deals with:
MHenson42, Vlady the Putinator, Valtiel, Fretless, Shane159, Exafro, LoopQuantum, Laura (The Valve Queen), ***1776***, 100Watt, Edge of Darkness, Ledvedder, SilverVox, Rikguitarstudio, Stompboxfreak72, jet66, JiveTurkey, Dolf, DoubleBarrel, RyanDistortion, legion...
Good deals with:
MHenson42, Vlady the Putinator, Valtiel, Fretless, Shane159, Exafro, LoopQuantum, Laura (The Valve Queen), ***1776***, 100Watt, Edge of Darkness, Ledvedder, SilverVox, Rikguitarstudio, Stompboxfreak72, jet66, JiveTurkey, Dolf, DoubleBarrel, RyanDistortion, legion...
Re: Effect processor's with Dual outputs
Well, the only one I've tried is the M13, and honestly I don't think it sounds all that great. There are loads of different effects and the functionality is awesome, totally brilliant. But the actual sound is a bit flat and uninspiring.
----------------------------------------------------------------------------------------------
Band: http://www.captainhorizon.co.uk/
Band: http://www.captainhorizon.co.uk/
-
sleewell
- Hall of Fame Member
- Posts: 9927
- Joined: Fri Jan 18, 2013 10:38 pm
- Location: sitting in the waiting room
Re: Effect processor's with Dual outputs
I have owned and sold the m9, nova system, RP1000. Now I have and love the gsp1101. Digitech stuff just makes the most sense and sounds the best for me.
-
Mesa/Kramer
- Hall of Fame Member
- Posts: 2868
- Joined: Sat Jan 19, 2013 4:10 pm
- Location: Seattle
Re: Effect processor's with Dual outputs
sleewell wrote:I have owned and sold the m9, nova system, RP1000. Now I have and love the gsp1101. Digitech stuff just makes the most sense and sounds the best for me.
What did you not like about the RP 1000?
Soldano SLO 100
Marshall DSL 50
Mesa Boogie MK III
Peavey 5150 II
Bugera 1960
Jet City JCA 50
Jet City JCA 20
ADA MP-1
Marshall DSL 50
Mesa Boogie MK III
Peavey 5150 II
Bugera 1960
Jet City JCA 50
Jet City JCA 20
ADA MP-1
-
ConcreteVampire
- Hall of Fame Member
- Posts: 609
- Joined: Sun Feb 03, 2013 3:09 am
- Location: Tarzana, CA
Re: Effect processor's with Dual outputs
RP Floor pedal GSP rack
RP one chip GSP two, for reverb tails for example
RP wall wart GSP Internal
Same chips in both
Other subleties.... Looper, midi Etc...
RP cheaper!
I have the RP, it's powerful, and I'm sick of lugging a rack...
RP one chip GSP two, for reverb tails for example
RP wall wart GSP Internal
Same chips in both
Other subleties.... Looper, midi Etc...
RP cheaper!
I have the RP, it's powerful, and I'm sick of lugging a rack...
-
sleewell
- Hall of Fame Member
- Posts: 9927
- Joined: Fri Jan 18, 2013 10:38 pm
- Location: sitting in the waiting room
Re: Effect processor's with Dual outputs
Mesa/Kramer wrote:sleewell wrote:I have owned and sold the m9, nova system, RP1000. Now I have and love the gsp1101. Digitech stuff just makes the most sense and sounds the best for me.
What did you not like about the RP 1000?
i liked it, i just like the gsp more. same platform, same sounds. i sold the rp to get the gsp. if you are already using rack gear it just makes more sense but they both sound great.