UAD Soundmachine WoodWorks plugin: Wow!
Moderators: greatmutah, GuitarBilly
- Loop Bizkit
- Hall of Fame Member
- Posts: 4583
- Joined: Fri Jan 18, 2013 1:02 pm
UAD Soundmachine WoodWorks plugin: Wow!
So...shameless product plug here.
I was messing around today with my acoustic. I play acoustic probably 10 times more frequently than electric, but record acoustic probably 10% as often as electric... I hate mic'ing things up and going through all of the hassle. I usually just want to record quick.
So, I plugged in my Martin directly to the interface, and recorded the guitar straight from it's internal fishman pickup. Not ideal, obviously. Or usable, TBH...
Then I slapped the WoodWorks plugin on, and BAM... got all of the body and harmonic stuff back, to the point where it's darn near good enough, if not good enough.
I just wrote a little slap/tap Candyrat style thing... here you be:
https://soundcloud.com/ar3nd/phaelon
I was messing around today with my acoustic. I play acoustic probably 10 times more frequently than electric, but record acoustic probably 10% as often as electric... I hate mic'ing things up and going through all of the hassle. I usually just want to record quick.
So, I plugged in my Martin directly to the interface, and recorded the guitar straight from it's internal fishman pickup. Not ideal, obviously. Or usable, TBH...
Then I slapped the WoodWorks plugin on, and BAM... got all of the body and harmonic stuff back, to the point where it's darn near good enough, if not good enough.
I just wrote a little slap/tap Candyrat style thing... here you be:
https://soundcloud.com/ar3nd/phaelon
EndTime wrote:It’s a forum of Loops .
- GuitarBilly
- Chief Executive Owl
- Posts: 48416
- Joined: Thu Jan 17, 2013 9:03 pm
Re: UAD Soundmachine WoodWorks plugin: Wow!
Sounds amazing man!!!! I need to look into this plug-in
Guitars:
'78 Les Paul Pro / '89 SG Special/ '04 Gibson Les Paul Classic 3 pickup / Jackson Star/ Endres Tele / Fernandes Rhoads/ ''74 Hohner MIJ strat/ 2 Partscasters
Amps:
Depends on when you ask. I got tired of constantly updating this section lol
Cabs
Marshall 1960A w V30s/ Seismic 2x12 w Redback and V30.
Questions about the forum: please PM here. Can't access the forum? Need a password reset? Please access our Facebook page https://www.facebook.com/GuitarGearForumOfficial and message me through it.
'78 Les Paul Pro / '89 SG Special/ '04 Gibson Les Paul Classic 3 pickup / Jackson Star/ Endres Tele / Fernandes Rhoads/ ''74 Hohner MIJ strat/ 2 Partscasters
Amps:
Depends on when you ask. I got tired of constantly updating this section lol
Cabs
Marshall 1960A w V30s/ Seismic 2x12 w Redback and V30.
Questions about the forum: please PM here. Can't access the forum? Need a password reset? Please access our Facebook page https://www.facebook.com/GuitarGearForumOfficial and message me through it.
Re: UAD Soundmachine WoodWorks plugin: Wow!
I never would've guessing this was not mic'd.
EVH
Mesa
Bauer
Guiterrorist
Pakistani Right Hand of Doom
Pesobag
Good Deals: http://www.guitargearforum.com/forum/viewtopic.php?f=25&t=21#p14231
Mesa
Bauer
Guiterrorist
Pakistani Right Hand of Doom
Pesobag
Good Deals: http://www.guitargearforum.com/forum/viewtopic.php?f=25&t=21#p14231
Re: UAD Soundmachine WoodWorks plugin: Wow!
NinjaRaf wrote:I never would've guessing this was not mic'd.
me either. im digging the snare as well
Re: UAD Soundmachine WoodWorks plugin: Wow!
Definitely taking this clip to the bushes
Whatnow2012 wrote:try humberck piskup is bettor for metal than singlecpoil for blues
Unstrung wrote:ya it am bast
Rampage wrote:When life hands you distortion, fuck everything else.
_________________
Rigs:
Bauer-Burny-Dark Matter-Hamer-Ibanez-Starfield-Warwick
Fryette PowerStation, Peavey 5150 2x12, Peavey VTM60, Starfield VPA-1, Sound City Master Lead 50, VVT Simo-Plex, Taurus THD450
Re: UAD Soundmachine WoodWorks plugin: Wow!
I definitely would have thought this was at least a blend of a microphone and a piezo. It sounds really good. I have been using acoustic IR's for a few years with my acoustics when playing live, but this plug-in puts those to shame. Beautiful.
Xotic XSC-1
PRS CE24
Sterling JP150
Wolfgang partscaster
PRS MT15
Laney GH30r 1x12
PRS CE24
Sterling JP150
Wolfgang partscaster
PRS MT15
Laney GH30r 1x12
- Loop Bizkit
- Hall of Fame Member
- Posts: 4583
- Joined: Fri Jan 18, 2013 1:02 pm
Re: UAD Soundmachine WoodWorks plugin: Wow!
Thanks man!
To be fair, it's not JUST the UA plug... I added some reverb, and compressed the guitar a lot too, to even out the performance a bit... but the tone is pretty much all UA.
That whole style of playing mystified me until I realized the guitars were HEAVILY compressed. Like, Mike Dawes, Andy McKee, etc.. they're doing all of this tapping, harmonic slaps, etc, while finger picking... and each technique, uncompressed, is wildly louder/quieter than the others. You really have to squash a lot to get things even.
To be fair, it's not JUST the UA plug... I added some reverb, and compressed the guitar a lot too, to even out the performance a bit... but the tone is pretty much all UA.
That whole style of playing mystified me until I realized the guitars were HEAVILY compressed. Like, Mike Dawes, Andy McKee, etc.. they're doing all of this tapping, harmonic slaps, etc, while finger picking... and each technique, uncompressed, is wildly louder/quieter than the others. You really have to squash a lot to get things even.
EndTime wrote:It’s a forum of Loops .
- ajaxlepinski
- Crystal Lettucer
- Posts: 23723
- Joined: Sun Jul 21, 2013 12:35 am
Re: UAD Soundmachine WoodWorks plugin: Wow!
Wow! That's a really rich sounding acoustic tone!
That low end is beautiful!!!
That low end is beautiful!!!
1969 Sunn Solarus ● 2x 1980's Randall RG-80 ● 2013 Hi-Tone HT103-DG (Best Rig 2014) ● 2015 Mortatone 12/15 Cab w/EV SRO's ● 2017 Jubilee ● 2019 Ceriatone Model Tee ● 2019 Randall Diavlo ● 2020 VHT D50 Dumble Clone
Walt wrote:But when the hour is nigh, and the lights are low, and I got a little toothpick of a shwag joint in my teeth, and my friends want to hear me play "Into the Void", or "TNT", "or "Cemetery Gates"...I plug my 600 dollar guitar into my 150 dollar amp, and I am a Rawk gawd.
- Loop Bizkit
- Hall of Fame Member
- Posts: 4583
- Joined: Fri Jan 18, 2013 1:02 pm
Re: UAD Soundmachine WoodWorks plugin: Wow!
RaceU4her wrote:NinjaRaf wrote:I never would've guessing this was not mic'd.
me either. im digging the snare as well
Ready for a laugh?
That's the SD3 Djent Kit.
It gets really polite when you pull back the snare velocity.
EndTime wrote:It’s a forum of Loops .
Re: UAD Soundmachine WoodWorks plugin: Wow!
That's straight off the Fishman? Sounds gorgeous and I'd have never known that wasn't mic'd.
This seems like the acoustic version of using IRs and I'm all for it.
This seems like the acoustic version of using IRs and I'm all for it.
MISTER NOBODY™ wrote:STFU Dave
Re: UAD Soundmachine WoodWorks plugin: Wow!
Pretty cool Loop! I think if I ever played anything other than power chords i'd grab that plugin right a way
GAB DrumJams - YouTube & Soundcloud
Re: UAD Soundmachine WoodWorks plugin: Wow!
Impressive!
Cameron Amps wrote:He's right....I think VTMs sound great....go get one. No nos tubes needed.
TurboPablo wrote:Scribble strips are for kids.