New Build

scottdh · Post by **scottdh** » Thu Mar 04, 2021 5:03 pm

Finished this one last month. Black walnut body, maple/purpleheart neck, kingwood fretboard, ABM bridge, aluminum side dots, 27" scale. The pickup is a Dimarzio Multibucker that was wound years ago for a friend who runs a music shop. It's a Super Distortion and Tone Zone in one housing, wired in series (no switching). Really fun, beefy sounding double humbucker. Tried a new material for the nut this time - Polyoxymethylene. Worked really well, shaped a little easier than GraphTech, and it's available in 10mm thick sheets.

Direct link to photo album: https://photos.app.goo.gl/q5xsAZksp8Mif2hc9

Devin · Post by **Devin** » Thu Mar 04, 2021 5:34 pm

Looks pretty fuckin dope man!

I've been tempted by dem Multibuckers a few times but never did get one

nightflameauto · Post by **nightflameauto** » Thu Mar 04, 2021 5:38 pm

That is a gorgeous instrument. I really like the single bucker/just a volume config too. So much wood.

fretless · Post by **fretless** » Thu Mar 04, 2021 8:24 pm

pics don't worky for me boo

clipless bumper · Post by **clipless bumper** » Thu Mar 04, 2021 8:41 pm

Same here.....

scottdh · Post by **scottdh** » Thu Mar 04, 2021 10:03 pm

fretless wrote:pics don't worky for me boo

Sorry! Hopefully they'll work now...

mortatone · Post by **mortatone** » Thu Mar 04, 2021 10:15 pm

Super nice looking. Love the deep dark color and simplicity.

Curious, that large semi-circle recess surrounding the neck pocket on the back, is that just an aesthetic design or is there a practical reason for it? Looks very pleasing either way. Nice job.

scottdh · Post by **scottdh** » Fri Mar 05, 2021 8:05 am

mortatone wrote:Super nice looking. Love the deep dark color and simplicity.

Curious, that large semi-circle recess surrounding the neck pocket on the back, is that just an aesthetic design or is there a practical reason for it? Looks very pleasing either way. Nice job.

Thanks very much! So, I got the idea from an old Robin Guitars Medley that I got from the same guy who gave me the pickup. It has a similar recess on the back, presumably to help with upper fret access, and I thought it was cool. Necessary? Probably not

fretless · Post by **fretless** » Fri Mar 05, 2021 10:28 am

they don't work in chrome , wtf chrome gotta direct link ?

clipless bumper · Post by **clipless bumper** » Fri Mar 05, 2021 10:31 am

fretless wrote:they don't work in chrome , wtf chrome gotta direct link ?

Aah - wondered what that was about.

You would think, if anything, GoogleUserContent would work with Chrome! WTF!?!?

fretless · Post by **fretless** » Fri Mar 05, 2021 10:40 am

well they don't seem to work in my chrome

Devin · Post by **Devin** » Fri Mar 05, 2021 10:44 am

I saw all the pics yesterday when you first posted this thread, but today I don't see anything except minus signs

clipless bumper · Post by **clipless bumper** » Fri Mar 05, 2021 11:01 am

fretless wrote:well they don't seem to work in my chrome

Mine either

scottdh · Post by **scottdh** » Mon Mar 08, 2021 12:58 pm

fretless wrote:well they don't seem to work in my chrome

Well damn. I’m so sorry guys. I’ll post direct links to the album tonight.

scottdh · Post by **scottdh** » Mon Mar 08, 2021 1:11 pm

See if this will work...

https://photos.app.goo.gl/q5xsAZksp8Mif2hc9

jgreenwd · Post by **jgreenwd** » Mon Mar 08, 2021 1:34 pm

Direct link works!

scottdh wrote:
mortatone wrote:Super nice looking. Love the deep dark color and simplicity.

Curious, that large semi-circle recess surrounding the neck pocket on the back, is that just an aesthetic design or is there a practical reason for it? Looks very pleasing either way. Nice job.

Thanks very much! So, I got the idea from an old Robin Guitars Medley that I got from the same guy who gave me the pickup. It has a similar recess on the back, presumably to help with upper fret access, and I thought it was cool. Necessary? Probably not

I had a early 00's Jackson Dinky DKMGT with a similar cutout on the back. It was more offset towards the lower horn and a little less pronounced, but did help with upper fret access on a thicker body.

Really nice looking build! There are a few visual things that would bother me after a while (I'd prefer a narrower waist, deeper cutaways.. just some visual design details). But, the execution looks stunning!

fretless · Post by **fretless** » Tue Mar 09, 2021 7:37 am

scottdh wrote:See if this will work...

https://photos.app.goo.gl/q5xsAZksp8Mif2hc9

Yes that works. Really sweet man! Love it !

scottdh · Post by **scottdh** » Tue Mar 09, 2021 9:20 am

jgreenwd wrote:Direct link works!

scottdh wrote:
mortatone wrote:Super nice looking. Love the deep dark color and simplicity.

Curious, that large semi-circle recess surrounding the neck pocket on the back, is that just an aesthetic design or is there a practical reason for it? Looks very pleasing either way. Nice job.

Thanks very much! So, I got the idea from an old Robin Guitars Medley that I got from the same guy who gave me the pickup. It has a similar recess on the back, presumably to help with upper fret access, and I thought it was cool. Necessary? Probably not

I had a early 00's Jackson Dinky DKMGT with a similar cutout on the back. It was more offset towards the lower horn and a little less pronounced, but did help with upper fret access on a thicker body.

Really nice looking build! There are a few visual things that would bother me after a while (I'd prefer a narrower waist, deeper cutaways.. just some visual design details). But, the execution looks stunning!

Thanks so much! I think you're right design-wise. I'm going to look at some slight mods to the curves in the waist area, and the cutaways were actually bugging me a little too. I don't think it will take much to get them more in line (for future builds, anyway). Appreciate the input!

scottdh · Post by **scottdh** » Tue Mar 09, 2021 9:21 am

fretless wrote:
scottdh wrote:See if this will work...

https://photos.app.goo.gl/q5xsAZksp8Mif2hc9

Yes that works. Really sweet man! Love it !

Thanks so much!

itchyfingers · Post by **itchyfingers** » Tue Mar 09, 2021 12:09 pm

That looks straight up evil, Scott. :evil:

Great job on the cavity cover, and DAT NECK! :fap:

scottdh · Post by **scottdh** » Wed Mar 10, 2021 9:17 am

itchyfingers wrote:That looks straight up evil, Scott.

Great job on the cavity cover, and DAT NECK!

Many thanks!

Devin · Post by **Devin** » Wed Mar 10, 2021 9:19 am

scottdh wrote:Thanks very much! So, I got the idea from an old Robin Guitars Medley that I got from the same guy who gave me the pickup. It has a similar recess on the back, presumably to help with upper fret access, and I thought it was cool. Necessary? Probably not

Samick/Valley Arts used to advertise this feature big time in the 90's

Guitar Gear Forum

New Build

New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build

Re: New Build