Hello all you good people out there,
Does anyone have any experience of fixing a torn dust cap for this speaker.
It might be a slightly unusual version of the G12-80 with a fairly large silver dust cap. This G12-80 is one of a pair in a Maine amp.
Hi res images
https://www.dropbox.com/s/52lpjgh7kzv1s ... 8.JPG?dl=0
https://www.dropbox.com/s/8zqdtkgftugl8 ... 1.JPG?dl=0
Big thanks,
Marty
Rola Celestion G12-80 torn dust cap
Moderators: greatmutah, GuitarBilly
-
GuitarBilly
- Chief Executive Owl
- Posts: 48416
- Joined: Thu Jan 17, 2013 9:03 pm
- Location: Rockville, MD
- Contact:
Re: Rola Celestion G12-80 torn dust cap
Hey Marty,
Welcome. I can't see the pictures you posted. But generally speaking you should be fix the tear (if doable, I can't see the pics) by using masking tape to pull out the dust cap to it's original position, then gently applying a bit of super glue.
Is it affecting the sound at all?? If it's not, I'd just leave it alone...
Welcome. I can't see the pictures you posted. But generally speaking you should be fix the tear (if doable, I can't see the pics) by using masking tape to pull out the dust cap to it's original position, then gently applying a bit of super glue.
Is it affecting the sound at all?? If it's not, I'd just leave it alone...
Guitars:
'78 Les Paul Pro / '89 SG Special/ '04 Gibson Les Paul Classic 3 pickup / Jackson Star/ Endres Tele / Fernandes Rhoads/ ''74 Hohner MIJ strat/ 2 Partscasters
Amps:
Depends on when you ask. I got tired of constantly updating this section lol
Cabs
Marshall 1960A w V30s/ Seismic 2x12 w Redback and V30.
Questions about the forum: please PM here. Can't access the forum? Need a password reset? Please access our Facebook page https://www.facebook.com/GuitarGearForumOfficial and message me through it.
'78 Les Paul Pro / '89 SG Special/ '04 Gibson Les Paul Classic 3 pickup / Jackson Star/ Endres Tele / Fernandes Rhoads/ ''74 Hohner MIJ strat/ 2 Partscasters
Amps:
Depends on when you ask. I got tired of constantly updating this section lol
Cabs
Marshall 1960A w V30s/ Seismic 2x12 w Redback and V30.
Questions about the forum: please PM here. Can't access the forum? Need a password reset? Please access our Facebook page https://www.facebook.com/GuitarGearForumOfficial and message me through it.
-
soulsurfer
Re: Rola Celestion G12-80 torn dust cap
The d-cap shouldn't move a lot there. Obviously someone/something pressed against it and cracked the aluminum.
Super glue should seal it up fine. You can mix it with tissue if you need to fill larger gaps.
Super glue should seal it up fine. You can mix it with tissue if you need to fill larger gaps.