Amp Stand Builds

joshatatlasstands · Post by **joshatatlasstands** » Sat Feb 07, 2015 8:35 am

Finished this Amp Builder's/Tech Chassis Stand this week…Red Oak.

The next one will have a waterproof tray for a sponge, a breadboard, and a power outlet with on/off switch built in. I'll also try to get the arms to pivot 360 degrees and clamp to the chassis at some point.

joshatatlasstands · Post by **joshatatlasstands** » Sun Feb 08, 2015 7:29 am

Changed the direction of the grain on the guitar stands, thinking it looks better running horizontal…finished these two up recently. Used up some reclaimed Wormy Chestnut rafters off an over-a-century old roof structure in North Carolina.

Something similar in basswood next.

joshatatlasstands · Post by **joshatatlasstands** » Sun Feb 15, 2015 8:35 am

Just wrapped up a black cherry Low Rider amp stand to fit a Vintage Sound Classic 15 combo in a cherry cabinet.

DIY link: http://atlas-stands.com/vintage-sounds- ... tar-stand/

Raw materials before milling

The amp

Coming soon will be a cherry studio amp stand for a Twin Reverb and Milkman Creamer.
http://atlas-stands.com/twin-reverb-mil ... nd-cherry/

joshatatlasstands · Post by **joshatatlasstands** » Tue Feb 24, 2015 7:40 am

We try to do something like this a couple times a year to show our gratitude, this time it's a basswood guitar stand.

Link to enter: http://atlas-stands.com/giveaway-2/

joshatatlasstands · Post by **joshatatlasstands** » Wed Mar 18, 2015 6:49 pm

Congrats to Myke Fedyk, winner of the St. Patrick's Day giveaway this week!

Just finished up this Cherry Studio amp stand with an adjustable backrest for a Twin Reverb or Milkman Creamer combo.

DIY link: http://atlas-stands.com/twin-reverb-mil ... nd-cherry/

Hoping for the next giveaway on July 4th!

joshatatlasstands · Post by **joshatatlasstands** » Mon Apr 06, 2015 7:25 pm

This is the latest solid sassafras Atlas Studio Amp Stand I built from a few weeks ago. I've been covered up lately and just now getting around to sharing. Its the same wood as the 1968 Ampeg that's sitting on it, just not been popped black, sanded back down and then stained English Chestnut. Originally I was going to keep it for myself and my Ampeg. It's gone to CA now.

joshatatlasstands · Post by **joshatatlasstands** » Mon May 04, 2015 8:55 am

First attempt at a laminated guitar stand design. Paulownia with a layer of chestnut down the middle. 6 pounds.

joshatatlasstands · Post by **joshatatlasstands** » Tue May 05, 2015 8:01 pm

Finished shaping this rough cut black cherry into an amp chassis stand this week…

joshatatlasstands · Post by **joshatatlasstands** » Wed May 13, 2015 7:46 pm

Went with Walnut sides and a Butternut center piece here, kept the stock on this one as thick as possible. Somewhat rustic as well with some of the wane wood and wormholes.

joshatatlasstands · Post by **joshatatlasstands** » Tue May 26, 2015 7:54 pm

Butternut this time

skybluegary · Post by **skybluegary** » Tue May 26, 2015 11:11 pm

Some gorgeous work there josh :hi5:

joshatatlasstands · Post by **joshatatlasstands** » Wed May 27, 2015 5:59 am

Thank you!

:rawk:

joshatatlasstands · Post by **joshatatlasstands** » Mon Jun 29, 2015 8:14 pm

Finally finished this solid Black Walnut Low Rider amp stand for a Mesa Boogie Mark V Combo after 11 weeks on the workbench. It took a while but was a true pleasure to build.

Build Thread: http://atlas-stands.com/mesa-boogie-mar ... ery/page/1

joshatatlasstands · Post by **joshatatlasstands** » Sun Jul 12, 2015 4:56 pm

Finished this guitar stand for a Martin D-28 this week - Reclaimed American Wormy Chestnut

Build Thread: http://atlas-stands.com/martin-d-28-atl ... ery/page/1

Devin · Post by **Devin** » Mon Jul 13, 2015 9:39 am

joshatatlasstands wrote:Finished this Amp Builder's/Tech Chassis Stand this week…Red Oak.

[/url]

The next one will have a waterproof tray for a sponge, a breadboard, and a power outlet with on/off switch built in. I'll also try to get the arms to pivot 360 degrees and clamp to the chassis at some point.

That is too freakin cool!!

Those amp cabs you build are freaking GORGEOUS too (just like everything else you build) :love:

joshatatlasstands · Post by **joshatatlasstands** » Mon Jul 13, 2015 11:54 am

Thank you!

joshatatlasstands · Post by **joshatatlasstands** » Tue Jul 14, 2015 7:07 pm

Atlas Amp Building Chassis Stand - Oak - with a second tray for tubes

Build Thread: http://atlas-stands.com/oak-chassis-stand/

clipless bumper · Post by **clipless bumper** » Tue Jul 14, 2015 7:08 pm

I like the tube tray!
How much for just a tray?

joshatatlasstands · Post by **joshatatlasstands** » Tue Jul 14, 2015 7:25 pm

The one pictured ran $75 finished with a tung oil. The owner changes tubes alot and needed an extra tray.

clipless bumper · Post by **clipless bumper** » Tue Jul 14, 2015 7:28 pm

Oooof - I thought maybe I could afford a tray.......

joshatatlasstands · Post by **joshatatlasstands** » Tue Jul 14, 2015 8:36 pm

You could probably make one, they aren't complicated, just time consuming.

clipless bumper · Post by **clipless bumper** » Tue Jul 14, 2015 8:40 pm

I can see the work you put into them - finished inside and out, smooth surfaces, radiused corners everywhere. You really make a quality product.

joshatatlasstands · Post by **joshatatlasstands** » Tue Jul 14, 2015 11:46 pm

Thank you

joshatatlasstands · Post by **joshatatlasstands** » Wed Jul 15, 2015 7:31 pm

Atlas Low Rider Amp Stand with an adjustable backrest - Cherry

joshatatlasstands · Post by **joshatatlasstands** » Tue Jul 21, 2015 9:01 pm

My latest completion, a Walnut Amp Chassis Stand - the adjustable brackets attach directly to an amp chassis and rotate 360 degrees.

Guitar Gear Forum

Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds

Re: Amp Stand Builds