Page 1 of 1
NWHD!
Posted: Sun Jul 14, 2013 12:29 pm
by skybluegary
New wiring harness day, yay!
Recently bought my first soldering iron (i know, i should have done it 35+ years ago), first project pic.
Cts500 pots, sprague vitamin q 0.27 caps. 50's wiring.
Re: NWHD!
Posted: Sun Jul 14, 2013 12:42 pm
by Dickarms
i should clean up my wiring some day. id say now is as good a time as any, considering Gizmo seems to have developed a grounding issue.
Re: NWHD!
Posted: Sun Jul 14, 2013 1:19 pm
by skybluegary
Well yes, it was necessity that forced my hand. The bridge vol pot kept seizing up, the tone pots are yamaha push/push pots (2006 yamaha sg2000) that don't seem to be 100% clever since the stock pickups were changed, and I wanted to try another neck pickup, so going to do a full rewire and pickup change together.
Re: NWHD!
Posted: Tue Jul 16, 2013 1:36 pm
by skybluegary
Switchcraft toggle switch wired.
Re: NWHD!
Posted: Fri Aug 02, 2013 6:31 am
by Elessar [Sly]
Pron
Re: NWHD!
Posted: Fri Aug 02, 2013 6:35 am
by Marc G
skybluegary wrote:New wiring harness day, yay!
Recently bought my first soldering iron (i know, i should have done it 35+ years ago), first project pic.
Cts500 pots, sprague vitamin q 0.27 caps. 50's wiring.
it's never too late to pick up a soldering iron! now... let the mods begin!
Re: NWHD!
Posted: Fri Aug 02, 2013 5:51 pm
by Casey4s
Nice job
Re: NWHD!
Posted: Fri Aug 02, 2013 6:34 pm
by clipless bumper
What is that solder around all 3 Wires?
(on the switch pic)
Re: NWHD!
Posted: Fri Aug 02, 2013 6:35 pm
by clipless bumper
stupid double post......
Re: NWHD!
Posted: Fri Aug 02, 2013 6:50 pm
by Casey4s
mamberg wrote:What is that solder around all 3 Wires?
Tying the shielding together.
