Guitar Gear Forum

I'm trying to raise money for a custom guitar I'm having built so I'm selling off gear that I don't need or don't use. Feel free to negotiate on prices or offer trades. I'd rather have cash, but I may consider trades too. I have some references form Harmony Central and Rig-Talk.

I had over 2,300 posts on Harmony Central under the name JonVengeance: I've had good deals with the following over there: ShizzelDizzel, RG_76, DiscoJason, freehandarson, rockitsauce, Wolfbane20, RustyMetal

This is what I have:

1993 Fender american Standard Strat, the pickups were replaced with Texas Specials and a pearl pickguard was added. $620





Partscaster Tele: Warmoth Wenge fat neck, Mexican Standard deluxe tele body, stainless steel frets, GFS Gotoh style tuners, JB Jazz Neck, GFS lil Killer, med output bridge, $550.
Willing to part out.


Ampeg AMG100 $200.00 -STOCK PHOTO


Tony Iommi Bridge Pickup $80.00



Dimarzio Super Distortion 3 $40.00


SD Distortion Bridge, Red $45.00


Bare Knuckle Pickups Warpig Set, Distressed Covers, were in the Naturalburst SG below $220.00


Sperzel tuners $35.00


Grover Tuners set - Chrome Set. IMAGE SEARCH PHOTO $30.00



SG all Parts Pickguard B/W/B $10.00


SG Pickguard Flat Black $10.00


Gibson 498 T Bridge $50.00


DOD YJM 308 $55.00

Digitech - Multi effects $60.00

Feel free to make an offer on anything. I'm unsure of what everything's going for right now.

What's your bottom price for the Sperzels?

Skylark44 wrote:What's your bottom price for the Sperzels?

On those I think $35 is the lowest I will go. They are brand new and unused (I did open the box to look at them, but they were never installed). The lowest I saw them on ebay was $47.

bump

Lowered some prices.

Bump for Jon

Are the Grovers 3 per side, or 6 in line?

Cobrahead1030 wrote:Are the Grovers 3 per side, or 6 in line?

They are 3 Per side. They are from a Les Paul.

Bump. Still have most of this stuff for sale.

Is the Super 3 F-spaced?

I will measure it when I get home. It was in the neck position of a guitar when I bought it so I'm not sure.

Questions - the Warpig set:
would you consider breaking it up
Ceramic or Alnico
Floyd spacing or standard

I'd be interested in the bridge, if its ceramic, and F spacing.

Thanks.

Davidian wrote:Questions - the Warpig set:
would you consider breaking it up
Ceramic or Alnico
Floyd spacing or standard

I'd be interested in the bridge, if its ceramic, and F spacing.

Thanks.

I know the bridge is ceramic. I would consider breaking it up. I think it's f-spaced since its in a newer Gibson and they are f-spaced now, but I wil check when I'm back home. I'm in FL right now.

Sweet!!!

I kind of want that AMG100. I need to pm you.

How is the Iommi? I ironically just got a recommendation for the 498t haha

JiveTurkey wrote:How is the Iommi? I ironically just got a recommendation for the 498t haha

The Iommi is big sounding, but the guitar I tried it in (SG Standard) sounded too massive. It had too much low end and wasn't super tight. It would probably be awesome for rock or doom metal.

Davidian wrote:Sweet!!!

randyrules82 wrote:Is the Super 3 F-spaced?

Sorry I haven't been able to measure these pickups yet. I keep forgetting to buy a ruler to see if they are 50 or 53mm spacing. I looked for the info for the BKP, but the card I got only has the resistance listed and not the spacing.

I will let both of you know as soon as I find out.

JonVengeance wrote:

JiveTurkey wrote:How is the Iommi? I ironically just got a recommendation for the 498t haha

The Iommi is big sounding, but the guitar I tried it in (SG Standard) sounded too massive. It had too much low end and wasn't super tight. It would probably be awesome for rock or doom metal.

Thoughts on the Iommi vs. the 498 in a flying v? For coverband stuff (rock, not metal)

JiveTurkey wrote:

JonVengeance wrote:

JiveTurkey wrote:How is the Iommi? I ironically just got a recommendation for the 498t haha

The Iommi is big sounding, but the guitar I tried it in (SG Standard) sounded too massive. It had too much low end and wasn't super tight. It would probably be awesome for rock or doom metal.

Thoughts on the Iommi vs. the 498 in a flying v? For coverband stuff (rock, not metal)

I love the 498T so maybe I'm biased, but I think it's the much more versatile of the two. It doesn't have quite the output of the Iommi, but it's still hot enough. I play metal with it with no problems. It's crunchy and fairly tight with the sweetnes of an alnico pickup. The Iommi could do rock, fine also, but I think its less versatile. Also, the bottom end was a little loose to me.

PM sent

JonVengeance wrote:

Davidian wrote:Sweet!!!

randyrules82 wrote:Is the Super 3 F-spaced?

Sorry I haven't been able to measure these pickups yet. I keep forgetting to buy a ruler to see if they are 50 or 53mm spacing. I looked for the info for the BKP, but the card I got only has the resistance listed and not the spacing.

I will let both of you know as soon as I find out.

You could compare the bridge (Warpig) to the neck. The neck is only offered in standard spacing. If they don't match up then the bridge is F spaced and we're good to go.

Davidian wrote:

JonVengeance wrote:

Davidian wrote:Sweet!!!

randyrules82 wrote:Is the Super 3 F-spaced?

Sorry I haven't been able to measure these pickups yet. I keep forgetting to buy a ruler to see if they are 50 or 53mm spacing. I looked for the info for the BKP, but the card I got only has the resistance listed and not the spacing.

I will let both of you know as soon as I find out.

You could compare the bridge (Warpig) to the neck. The neck is only offered in standard spacing. If they don't match up then the bridge is F spaced and we're good to go.

I measured last night and the the neck was 50mm and the bridge was 52mm (F-spaced). It was hard to compare the two since they're still in the guitar. I'll be taking them out of the guitar tomorrow most likely.

Sweet! What do you want for it? If you're right there in Reston I'll come out and meet you.