Guitar Gear Forum

HELSTRUME wrote:What EQ do you like? I had the MXR 10 band, but maybe a parametric would work better. Or I could have put it straight into my amp like I did my Boogie

Depends on what you want to do. A Parametric is going to be more tweaky.

I have the MXR, The Boss GE-7, The Dano Fish and Chips, the cheap Behringer, a 3 band Parametric I built, and recently got a Behringer rack mount Parametric. I kind of switch around depending on what I want to do.

The MXR or Boss would probably work for most people, depending on what frequencies you prefer.

HELSTRUME wrote:

Shask wrote:

HELSTRUME wrote:Been using the Marshall for my cleans, and rock distortion. But I need to get something for heavy stuff. Was looking at the tight metal pro 2 and a couple others. I was playing with my duncan distortion height and pole pices, but its still bassy. I think maybe my guitar is just bassy. It weight 10 lbs on my scale. And i'm still thinking of just getting a Warmoth neck for it. I just want a flatter radius, and taller frets. I found a Schecter Omen 6 for 300 bucks in excellent condition. Maybe i'll just try it.

I love all the Schecters. I have like 6 of them I think, lol. I have an Omen Extreme.

I got 2 Harley Benton guitars recently. I really like them also. One is a Fusion HH, the other is a flat black Strat with active pickups. They are really killer for the little they cost.

You could always use an EQ pedal also. I have gotten to where I can't hardly play my amps without tons of EQ.

Whenever I go to buy the HB PRS copy, they are always out of the flamed black.

You try to order from the US store, or the Germany store?

HELSTRUME wrote:My choices in pedals are
Amptweaker tight metal pro 2
Ibanez penatonic
Oh my goat
Empress heavy.
Those are all my favs from all the demos.

I haven't tried those, but I generally prefer my amps or modelers over most of the distortion pedals I have.

Shask wrote:

HELSTRUME wrote:

Shask wrote:

HELSTRUME wrote:Been using the Marshall for my cleans, and rock distortion. But I need to get something for heavy stuff. Was looking at the tight metal pro 2 and a couple others. I was playing with my duncan distortion height and pole pices, but its still bassy. I think maybe my guitar is just bassy. It weight 10 lbs on my scale. And i'm still thinking of just getting a Warmoth neck for it. I just want a flatter radius, and taller frets. I found a Schecter Omen 6 for 300 bucks in excellent condition. Maybe i'll just try it.

I love all the Schecters. I have like 6 of them I think, lol. I have an Omen Extreme.

I got 2 Harley Benton guitars recently. I really like them also. One is a Fusion HH, the other is a flat black Strat with active pickups. They are really killer for the little they cost.

You could always use an EQ pedal also. I have gotten to where I can't hardly play my amps without tons of EQ.

Whenever I go to buy the HB PRS copy, they are always out of the flamed black.

You try to order from the US store, or the Germany store?

The Thomann store.

Shask wrote:

HELSTRUME wrote:What EQ do you like? I had the MXR 10 band, but maybe a parametric would work better. Or I could have put it straight into my amp like I did my Boogie

Depends on what you want to do. A Parametric is going to be more tweaky.

I have the MXR, The Boss GE-7, The Dano Fish and Chips, the cheap Behringer, a 3 band Parametric I built, and recently got a Behringer rack mount Parametric. I kind of switch around depending on what I want to do.

The MXR or Boss would probably work for most people, depending on what frequencies you prefer.

Maybe i'll just get another MXR

Alright, I just got a Raven PRS copy with a 24.7 scale off GC. I always liked the neck on the Raven LP I had. So we'll see how it is.

Can I be in the club now?

Yamaha THR100H
Yamaha DG130h

Yarbicus wrote:Can I be in the club now?

Yamaha THR100H
Yamaha DG130h

I always liked the DG130. This is what we get next
https://thisheavyearth.com/products/fleshrot-200-mono

Got the Raven tonight, and it looks well kept. Only a couple small nicks on the back of the body. It has a heavy body, and a narrow thin D shaped neck. The neck was straight, so I had to put relief in it, and the frets have a flatish feel to them like they were leveled or something. And there is no buzz anywhere on the neck. Looks like someone also filed in the nut gooves, and went a little too low. So i'm gonna need to get a new nut and put it on. The grover tuners and bridge feel solid, and the action was good. Tomorrow I will see how the electronics are, and how bad the pickups suck lol.

HELSTRUME wrote:Got the Raven tonight, and it looks well kept. Only a couple small nicks on the back of the body. It has a heavy body, and a narrow thin D shaped neck. The neck was straight, so I had to put relief in it, and the frets have a flatish feel to them like they were leveled or something. And there is no buzz anywhere on the neck. Looks like someone also filed in the nut gooves, and went a little too low. So i'm gonna need to get a new nut and put it on. The grover tuners and bridge feel solid, and the action was good. Tomorrow I will see how the electronics are, and how bad the pickups suck lol.

Sounds like a good platform to work with. If you like the feel, then a new nut and pickups is easy.

The Raven LP I had felt like a thinner Strat neck. This ones more a thinner Epi custom neck. I'm getting a graphtech nut for it. The pickups sound extra horrible, so I will have to change the bridge pickup out.

Thinking about trying my first ever plugin.

https://joeysturgistones.com/products/t ... -disruptor

Statutory Gape wrote:Thinking about trying my first ever plugin.

https://joeysturgistones.com/products/t ... -disruptor

I'm not really a plugin fan, but that one definitely looks cool, as a huge Dino fan.

Shask wrote:

Statutory Gape wrote:Thinking about trying my first ever plugin.

https://joeysturgistones.com/products/t ... -disruptor

I'm not really a plugin fan, but that one definitely looks cool, as a huge Dino fan.

I don't record even though I've been playing for 30 years. I figure that's the best way to get started these days.

I don't plan on selling amps any time soon.

I did guitar rig for practice years ago. But my interface broke.

After playing my Raven for a while, and trying out a few guitars. I don't think i'm a big fan of D and U necks. Not sure if its the shoulders, the flat feel on the back or because most have a 43 mm nut width. C just feels perfect. I did however pick up a Dean Zelinsky that had a super soft V, and damn it felt great. Like a C with less shoulders. The Schecters, Fenders, and the Yamaha Pacificas all had the best feel. I think I will go with a Schecter next. The Harley Benton PRS copy says it has a C neck, but people have said that some of their guitars that say C has a more D neck. Like their LPs. I do still however like this Marshall with the SD-1. It does a good 80s hard rock sound. I just need a good pedal for heavier stuff.

Oh yea, the Raven almost feels fretless when playing. The frets are lower then my Strats. They probably filed them too low, and thats why they were filing in the nut.

Statutory Gape wrote:

Shask wrote:

Statutory Gape wrote:Thinking about trying my first ever plugin.

https://joeysturgistones.com/products/t ... -disruptor

I'm not really a plugin fan, but that one definitely looks cool, as a huge Dino fan.

I don't record even though I've been playing for 30 years. I figure that's the best way to get started these days.

I don't plan on selling amps any time soon.

There are a lot of free amp sims out there if you just want to try messing around with the VST thing.

HELSTRUME wrote:I did guitar rig for practice years ago. But my interface broke.

I have Guitar Rig 6, but I hardly ever use it. Mainly just because I don't ever play though my computer. I always find it less inspiring than amps.

Even when I do play through my computer setup, I use a Fractal FM3, with Kali Audio LP-6 Monitors with a JBL Sub. The whole setup makes it sound decent.

HELSTRUME wrote:After playing my Raven for a while, and trying out a few guitars. I don't think i'm a big fan of D and U necks. Not sure if its the shoulders, the flat feel on the back or because most have a 43 mm nut width. C just feels perfect. I did however pick up a Dean Zelinsky that had a super soft V, and damn it felt great. Like a C with less shoulders. The Schecters, Fenders, and the Yamaha Pacificas all had the best feel. I think I will go with a Schecter next. The Harley Benton PRS copy says it has a C neck, but people have said that some of their guitars that say C has a more D neck. Like their LPs. I do still however like this Marshall with the SD-1. It does a good 80s hard rock sound. I just need a good pedal for heavier stuff.

I am not either. I cant really play D necks much, especially thin ones like Ibanez. The PRS SEs are a little Dish, but they dont bother me. My Charvel is close to a D also, but just round enough it straddles the line of C and D.

My preference though is definitely narrow and C shaped. That is why I love Schecters with their thicker necks. I like the Harley Bentons also. My Fusion and Strat both have narrow round necks, similar to a Fender. I like the Wolfgangs also.

Shask wrote:

HELSTRUME wrote:I did guitar rig for practice years ago. But my interface broke.

I have Guitar Rig 6, but I hardly ever use it. Mainly just because I don't ever play though my computer. I always find it less inspiring than amps.

Even when I do play through my computer setup, I use a Fractal FM3, with Kali Audio LP-6 Monitors with a JBL Sub. The whole setup makes it sound decent.

I just did it for late night headphone action. But I didn't want my comp for an amp. Same with my Iphone.

Shask wrote:

HELSTRUME wrote:After playing my Raven for a while, and trying out a few guitars. I don't think i'm a big fan of D and U necks. Not sure if its the shoulders, the flat feel on the back or because most have a 43 mm nut width. C just feels perfect. I did however pick up a Dean Zelinsky that had a super soft V, and damn it felt great. Like a C with less shoulders. The Schecters, Fenders, and the Yamaha Pacificas all had the best feel. I think I will go with a Schecter next. The Harley Benton PRS copy says it has a C neck, but people have said that some of their guitars that say C has a more D neck. Like their LPs. I do still however like this Marshall with the SD-1. It does a good 80s hard rock sound. I just need a good pedal for heavier stuff.

I am not either. I cant really play D necks much, especially thin ones like Ibanez. The PRS SEs are a little Dish, but they dont bother me. My Charvel is close to a D also, but just round enough it straddles the line of C and D.

My preference though is definitely narrow and C shaped. That is why I love Schecters with their thicker necks. I like the Harley Bentons also. My Fusion and Strat both have narrow round necks, similar to a Fender. I like the Wolfgangs also.

I was told the Warmoth standard thin was like the Charvel necks. A C/D mix. The Raven LP was C, and I was hoping this one was too. I played the Epi LP standard, and it felt a lot better then the custom model. Thats when I learned the custom was D also. I'm gonna stick with C necks, and look around at all the Schecters out now lefty. And realize i'm gonna have to spend some money lol.

You guys ever shim a guitar neck? The saddles on my Strat are way too low, so i'm gonna shim the neck some. Will I have to raise the nut to adjust for the new angle? I've never cut a nut, and have nobody around that can anymore.

HELSTRUME wrote:You guys ever shim a guitar neck? The saddles on my Strat are way too low, so i'm gonna shim the neck some. Will I have to raise the nut to adjust for the new angle? I've never cut a nut, and have nobody around that can anymore.

I shim almost every bolt on I have. I generally like the feel better. It is easy. Just take the neck off, put a few strips of masking tape on top of each other at the end of the neck, and then bolt it back together.

Does it affect the nut height? Make the strings lower at the first fret? I can always put a graphtech nut on my Strat also.