What size wrench for tuning peg nut?
Moderators: greatmutah, GuitarBilly
- LukeBurke1
- Hall of Fame Member
- Posts: 1455
- Joined: Tue Feb 05, 2013 1:37 pm
- Location: Pittsburgh, PA
What size wrench for tuning peg nut?
Can anyone tell me the size of wrench I would need to loosen the nut that holds a tuning peg to a headstock? I ordered a set of Schaller locking tuners for my guitar, so I'm going to make a trip to the hardware store to get a wrench and mini-screwdriver so I can actually install them. Thanks in advance!
Gibson Les Paul Traditional Pro II
Gibson SG-3
Gibson Les Paul Special
Vox AC30HWH
Janice Cabs 2x12 (Creamback 65s)
Good Deals with: rleechb, _ej_, phillbis, Axe, V/Rad Studios, boris the blade
Gibson SG-3
Gibson Les Paul Special
Vox AC30HWH
Janice Cabs 2x12 (Creamback 65s)
Good Deals with: rleechb, _ej_, phillbis, Axe, V/Rad Studios, boris the blade
Re: What size wrench for tuning peg nut?
I just tightened my Schaller locking tuners down on my Charvel this afternoon. I used a 10mm socket wrench.
Analogman / Bludotone / Bogner / Fargen / Fender / G&L / JAM Pedals / King Tone / RMC / Skervesen / Strymon / Vertex
"They don't think it be like it is, but it do." - Oscar Gamble
"They don't think it be like it is, but it do." - Oscar Gamble
- LukeBurke1
- Hall of Fame Member
- Posts: 1455
- Joined: Tue Feb 05, 2013 1:37 pm
- Location: Pittsburgh, PA
Re: What size wrench for tuning peg nut?
Rampage wrote:I just tightened my Schaller locking tuners down on my Charvel this afternoon. I used a 10mm socket wrench.
Thank you very much!
Gibson Les Paul Traditional Pro II
Gibson SG-3
Gibson Les Paul Special
Vox AC30HWH
Janice Cabs 2x12 (Creamback 65s)
Good Deals with: rleechb, _ej_, phillbis, Axe, V/Rad Studios, boris the blade
Gibson SG-3
Gibson Les Paul Special
Vox AC30HWH
Janice Cabs 2x12 (Creamback 65s)
Good Deals with: rleechb, _ej_, phillbis, Axe, V/Rad Studios, boris the blade
- facefirst
- Hall of Fame Member
- Posts: 3575
- Joined: Fri Jan 18, 2013 1:34 pm
- Location: Cleveland, OH
- Contact:
Re: What size wrench for tuning peg nut?
You could just use an adjustable crescent wrench.